Contact Info

Hardware & Drivers Issues

Category Archives

Subdomain and Domain forwarding not working properly with GoDaddy and Sonicwall Firewall

Godaddy ​Domain and Subdomain Forwarding times out without forwarding, unexpectedly, when using a Sonicwall Firewall.

Domain Forwarding is typically used to redirect a user to a different website when they type in a URL in a browser. In this case, the forwarding will time out – with either a browser 404 error – or a CONNECTION_TIMED_OUT message. DNS resolution will work properly – subdomain.domain.com for example will return the correct A record, pointing to Godaddy’s IP addresses.

The domain redirect may work sporadically on some phones or computers where traffic is not directly passing through a Sonicwall firewall.

The reason for the failed domain forwarding is that by default the Sonicwall enables TCP Packet Sequence Randomization which causes Godaddy’s Domain Forwarding service to break. When doing packet analysis in Wireshark, we saw TCP ACK connections out of sequence and dropped connections.

To fix this issue:

  1. Login into the IP address of the Sonicwall firewall.
  2. Go to http://{firewall.ip.address}/diag.html – You will get a warning about Advanced Settings
  3. Click on Internal Settings.
  4. Untick the box: “Enable TCP sequence number randomization”
  5. Scroll up and click Accept.
  6. Click Close.
  7. Reboot the firewall.

Verify you can now access a Domain forwarded address.  Note that servers behind the firewall will be slightly more vulnerable to host identification by disabling this TCP Sequence Randomization. But in this case, it would be a fairly targetted attack, so the overall risk is low.


Windows won’t start after Microsoft Update installation

Windows won’t start after update installation

This is a common problem we run in to while providing IT support with older computers. After applying a Microsoft Update patch, windows will partially boot, or not boot at all. Most of the times, windows will boot to its start screen, with a message similar to the below :

“Configuring Windows updates… 90% complete… Do not turn off your computer.”


USB Displayport Adapter causing BSOD with Intel HD4000 Graphics

This computer problem was a bit tough for us to figure out originally. We had a local IT partner who was getting the blue screen of death when their USB to VGA displayport adapter was plugged in to their Asus Vivobook S400CA laptop computer running windows 8. If we unplugged the USB displayport adapter, no bluescreens.


Subscribe to our Newsletter via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 159 other subscribers